Introduction of Molybdenum Wire Cut Machines

Molybdenum wire cut machine is one member of wire cut EDM family. Its working principle is to use successively moving molybdenum wires (called electrode wires) as electrodes to etch metals and cut workpieces through pulsed spark discharges. The quality of the workpiece it processes is in between, so it is called molybdenum wire cut edm.

It can be understood as a WEDM that can use brass wire repeatedly, but its cutting speed is not slower than brass wire cut edm, but higher than it. It’s just that the speed drops during the reversing process of the wire drum. At this time, the average power is calculated, not the high power, and the processing quality tends to be brass wire cut edm. The speed of moly wire cut edm is automatically controlled by the system and can be adjusted according to needs.

Moly wire cut machine has a variety of cutting functions (the working principle is the same as that of brass wire cut). During the processing, the control system will automatically adjust the processing parameters (high-frequency pulse width, pulse interval, number of power tubes and line speed) according to the programmed program. In addition, machining parameters can be changed manually and adjusted appropriately during machining.

On the basis of the low cost of use, good processing effect, and low cost of consumables, moly wire cut machine cites the advanced concepts and technologies of international mold processing equipment, upgrades the machine tool hardware, and improves the precision and stability of the machine tool. Therefore, moly wire cut edm has brought an innovation to the mold industry. On the premise of the same processing quality, it has also greatly reduced the cost of mold making!